Belden

0930 DSL 651 - LioN-S, DeviceNet I/O Device, 8DI (8x M8), M12 A-coded Power Supply, Plastic, 30 mm

(No reviews yet) Write a Review
SKU:
0930 DSL 651
Shipping:
Calculated at Checkout
$0.00

Description

LioN-S M8-30, Plastic, DeviceNet, M12 Bus Connector, A-coded, 8 DI, M8 3-pole

Specifications

Specifications

Product FamilyI/O Systems: Active - Standalone
Product Sub FamilyLioN-S
Item Description0930 DSL 651
Device TypeI/O Module
ProtocolDeviceNet
I/O Function8DI
Bus ConnectionM12, 5-poles, A-coded
Power Connection (System Supply)M12, 5-poles, A-coded
I/O ConnectionM8, 3-poles, A-coded
I/O TypeDigital Input

Product Life Cycle

Housing MaterialPBT + ASA

General Data

Protection Degree / IP Rating**IP67
Housing ColorBlack
PottedNo
Dimensions (W x H x D)30 mm x 40 mm x 205 mm
Weight200 g
Ambient Temperature (Operation)*-10 °C to 60 °C
Vibration Resistance15 g / 5 -500 Hz
Shock Resistance50 g / 11ms
Mounting2 hole screw mounting. Use standard M4 x 25 / 30 / 40 (lateral) screws with toothed lock washer (as per DIN 125) and self-locking nuts.
Fastening Torque (Fixing Screw)M4: 1 Nm
Fastening Torque (Ground Connection (FE))M4: 1 Nm
Fastening Torque (Bus Connection)M12: 0.5 Nm
Fastening Torque (Power Connection)M12: 0.5 Nm
Fastening Torque (I/O Connection)M8: 0.3 Nm
Included in DeliveryAttachable Labels: 10x, Sealing Caps: 2x M8

DeviceNet

ConnectionM12, 5-poles, A-coded
Number of Connections2
Transmission Rate125 kbps ... 500 kbps
Transmission Rate AdjustmentAutomatic
Addressing via Rotary Address Switches0…63 dec
Addressing via DeviceNet99 dec
Product Code27

Power Supply

Connection Module Supply VoltageM12, 5-poles, A-coded
Number of Connections2
Current Carrying Capacity of Connectormax. 4 A
Module Supply Voltage (Nominal)24 V DC (SELV/PELV)
Module Supply Voltage (Range)19 V DC to 30 V DC
Current Consumption (typ.)65 mA (at 24 V DC)
Reverse Polarity ProtectionYes
Status Indicator (System Supply)LED green
Diagnostic IndicatorNo
Connection Sensor Supply Voltagevia Module Supply Connection
Current Carrying Capacity of Connectormax. 4 A
Sensor Supply Voltage (Nominal)24 V DC (SELV/PELV)
Sensor Supply Voltage (Range)19 V DC to 30 V DC
Reverse Polarity ProtectionYes
Status Indicator (Sensor Supply)LED green
Diagnostic IndicatorNo

Digital Input Channels

Number of Digital Input Channelsmax. 8, fixed
ConnectionM8, 3-poles, A-coded
Number of Ports8x, 1 to 8
Channel TypeType 3 acc. to IEC 61131-2
Sensor Current Supplymax. 100 mA per port (at 30°C)
Input Wiring2-, 3-wire
Nominal Voltage24 V DC via US (module power supply)
Nominal Currenttyp. 5 mA
Sensor TypePNP
Input Voltage Range "0" signal-3 V DC …+5 V DC
Input Voltage Range "1" signal11 V DC … 30 V DC
Input Filter Time1 ms, fixed
Protective CircuitElectronicaly: Overload protection, short-circuit protection
Status Indicator (Inputs)LED yellow per channel
Diagnostic IndicatorLED red per port

Electrical Isolation

US (System Supply Voltage) / FE500 V DC
Bus connection / FE500 V DC

EMC Conformance

EMC Directive2014/30/EU
EN 61000-4-2 Electrostatic Discharge (ESD)Criterion B; 4 kV contact discharge, 8 kV air discharge
EN 61000-4-3 Electromagnetic FieldCriterion A; Field intensity: 10 V/m
EN 61000-4-4 Fast Transients (Burst)Criterion B, 2 kV
EN 61000-4-5 Surge VoltageCriterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m
EN 61000-4-6 Conducted immunityCriterion A; Test voltage 10 V
EN 55022 Radio Interference PropertiesClass A

Safety & Environmental Compliance

CEYes
RoHS CompliantYes

Approvals

ULcULus Listed, UL 508
UL-FileE230848

Notes

Protection Degree / IP Rating Note** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
System Power Supply Connection Note*do not connect / disconnect under voltage!
Update and RevisionRevision Number: 0.59 Revision Date: 05-24-2023
View AllClose

Related Products