Belden

0935 253 120 - CANopen / DeviceNet Data Single-Ended Cordset: M12 Standard, male, straight, 5-pin, A-coded, black body, 50 V AC / 60 V DC, 4 A; PUR black cable, 4-wires, Data: 2x0.25 mm² + Power: 2x0.34 mm²

(No reviews yet) Write a Review
SKU:
0935 253 120
Shipping:
Calculated at Checkout
$0.00

Description

CANopen / DeviceNet Data Single-Ended Cordset: M12 Standard, male, straight, 5-pin, A-coded, black body, 50 V AC / 60 V DC, 4 A; PUR black cable, 4-wires, Data: 2x0.25 mm² + Power: 2x0.34 mm²

Specifications

Specifications

Face View

Pin 1Pin 2Pin 3Pin 4Pin 5
shieldredblackwhiteblue
Product FamilyData Connectors
Product Sub FamilyM12 Standard
Connector TypeCordset, single ended
Type of Contact / GenderMale
Connector DesignStraight
Number of Pins5
CodingA
ShieldingUnshielded
Attachment TypeCoupling Screw
Rated Voltage60 V
Rated Impulse Voltage1.5 kV
Operating Voltage50 V AC / 60 V DC
Rated Current*4 A
Data TransmissionCANopen / DeviceNet
Contact Resistance≤ 10 mOhm
Insulation Resistance˃ 10^9 Ohm
Mating Cycles≤ 100
Ambient Temperature (Operation)*- 40 °C - + 80 °C
Protection Degree / IP Rating**IP65, IP67, IP68 (1 m / 24 h), IP69K
Design StandardIEC 61076-2-101
Pollution Degree3 acc. to DIN EN 60664-1 (VDE 0110-1)
Overvoltage CategoryIII acc. to DIN EN 60664-1 (VDE 0110-1)

Materials

Contact Base MaterialCuSn
Contact PlatingCu/Au
Contact Bearer MaterialTPU-GF
Contact Bearer ColorBlack
Flammability Class (Contact Bearer)UL 94 HB
Molded Body MaterialTPU
Molded Body ColorBlack
Flammability Class (Molded Body)UL 94 HB
Attachment MaterialStainless Steel

Circuitry

Fastening Torque (Attachment)M 12x1: (50-60) Ncm, hand-tight

Cable Data

Cable Number253
Conductor SizeData: 2x0.25 mm² + Power: 2x0.34 mm²
Number of Wires4
Minimal Bending Radius (Fixed Inst)˃ 5 x D
Minimal Bending Radius (Flexible Inst)˃ 10 x D
Cycles (Bending)˃ 1 M
Conductor materialCu
Cable Jacket MaterialPUR
Cable Jacket Colorblack matt similarly RAL 9005
Cable Diameter Dø 6.70 ± 0.20 mm
Wire Insulation MaterialData: PE + Power: PE or PP
Insulated Wire DiameterData: ø 2.05 ± 0.10 mm + Power: ø 1.40 ± 0.05 mm
Overall Shield (Cable)Cu-ETP1 tinned
Element ShieldAl-PT Foil
Foil shieldAl-PT Foil
Ambient Temperature (Fixed Installation)- 50 °C - + 80 °C
Ambient Temperature (Flex Installation)- 25 °C - + 80 °C
Ambient Temperature (Drag Chain Inst)- 25 °C - + 60 °C
UL Cable TypeAWM: 20549 or 21198
Flammability Class (Cable Jacket)DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1, CSA FT-1
Cable CharacteristicsExclusion of dangerous materials; Line construction acc. CAN-Bus and DeviceNET specification; Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Good chemical and oil resistance; Exclusion of PVC and Silicone; Free of lacquer wetting disturbing substances; Coldness flexibility
Core ColorsData: blue, white + Power: red, black

Safety & Environmental Compliance

RoHS Compliantyes

Resistances

HalogenfreeDIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1

Notes

Note DeratingNotice derating
Protection Degree / IP Rating Note** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
NoteDo not connect or disconnect under load.
View AllClose

Additional Information

Variant_Options:
Item #|Item Description|Cable Length
Variant_Options 5737:
5737|0935 253 120/2 M|2 m
View AllClose

Related Products