Belden

ELST 412 LED YE Au - M12 Insert Sensor/Actuator Receptacle Connector: Male, insert with LED, O-ring and external threads, M12 - mating side, solder contacts - connecting side, yellow LED, 4-pin, A-coded, unshielded, transparent body, 10-30 V DC, 4 A

(No reviews yet) Write a Review
SKU:
ELST 412 LED YE Au
Shipping:
Calculated at Checkout
$0.00

Description

M12 Insert Sensor/Actuator Receptacle Connector: Male, insert with LED, O-ring and external threads, M12 - mating side, solder contacts - connecting side, yellow LED, 4-pin, A-coded, unshielded, transparent body, 10-30 V DC, 4 A

Specifications

Specifications

Product FamilySensor / Actuator Connectors
Product Sub FamilyM12 Insert
Mating SideM12
Connecting SideSolder Contacts
Connector TypeReceptacle
Type of Contact / GenderMale
Connector DesignInsert with LED, O-ring and External Threads
Number of Pins4
CodingA
Attachment TypeScrew-Locking
Rated Voltage50 V
Rated Impulse Voltage0.8 kV
Operating Voltage10-30 V DC
Rated Current*4 A
Contact Resistance≤ 10 mOhm
Insulation Resistance˃ 10^9 Ohm
Mating Cycles≤ 100
Type of ConnectionSolder
Suitable Conductor Cross SectionSolid wires: 0.22 mm² to 0.5 mm² / Standed wires: 0.22 mm² to 0.38 mm²
Ambient Temperature (Operation)*- 25 °C - + 90 °C
Protection Degree / IP Rating**IP65, IP67, IP68 (1 m / 24 h)
Design StandardIEC 61076-2-101
Pollution Degree3 acc. to DIN EN 60664-1 (VDE 0110-1)
Clearance / Creepage DistanceDIN EN 60664-1 (2008/01); VDE 0110-1
Overvoltage CategoryIII acc. to DIN EN 60664-1 (VDE 0110-1)

Materials

Contact Base MaterialCuZn
Contact PlatingCu/Au
Contact Bearer MaterialPA
Contact Bearer ColorTransparent
Flammability Class (Contact Bearer)UL 94 V-2
PottedNo
Attachment MaterialPA
O-Ring MaterialFKM

Circuitry

Function IndicatorYellow LED
Fastening Torque (Attachment)M 12x1: (50-60) Ncm, hand-tight

Safety & Environmental Compliance

RoHS Compliantyes

Notes

Note Derating* Notice derating
Protection Degree / IP Rating Note* only if mounted and locked in combination with Hirschmann / Lumberg connector. On the installation side tightness has to be assured by taking proper measures.
NoteThe receptacle connector is constructively intended for usage in IP67 and IP68-products. To realise this protection class, the estimated location has to be designed accordingly. Further details see IEC 61076-2-101.
View AllClose

Additional Information

Variant_Options:
Item #|Item Description
Variant_Options 933363112:
933363112|ELST 412 LED YE Au
View AllClose