Belden

HK2H6S-2M-WS/9,75 L - SPE M12 PCB angled soldering insert, rear wall mounting screw, in plastic bag package

(No reviews yet) Write a Review
SKU:
HK2H6S-2M-WS/9,75 L
Shipping:
Calculated at Checkout
$0.00

Description

SPE M12 SPE 9.75 mm rear wall mounting package, PCB angled soldering THT insert, rear wall mounting screw, in plastic bag package

Specifications

Specifications

Product FamilySPE Receptacles
Product Sub FamilySPE Receptacle M12
Mating SideScrew-Locking / Push-Pull
Connecting SideSoldering
Type of Contact / GenderFemale
Connector DesignAngled
Number of Pins2
ShieldingShielded
Rated Voltage60 V
Operating Voltage50 V AC / 60 V DC
Rated Current*4 A
Contact Resistance≤ 20 mOhm
Shielding Resistance≤ 100 mOhm
Insulation Resistance˃ 5x10^8 Ohm
Testing Voltage Pin - Pin1 kV
Testing Voltage Pin - Shield2.25 kV
Transmission characteristics600 MHz
Data Rate10 Mbit/s 100 Mbit/s 1 Gbit/s 2.5 Gbit/s 5 Gbit/s 10 Gbit/s
Mating Cycles≥ 1000
Type of ConnectionScrew-Locking / Push-Pull
Thread SizeM12 x 1
Thread PlatingNickel-plated
Ambient Temperature (Operation)*- 40°C - +85°C
Protection Degree / IP Rating**IP65, IP67
Design StandardIEC 63171-6, IEEE 802.3bu (remote power supply over PoDL = Power over Data Line), IEEE 802.3cg (10BASE-T1)
Pollution Degree3 acc. to DIN EN 60664-1 (VDE 0110-1)
Moisture Sensitivity Level (MSL)1 acc. ECA/IPC/JEDEC J-STD-020D
Process Sensitivity Level (PSL)R0 acc. ECA/IPC/JEDEC J-STD-020D

Circuitry

Fastening Torque (Attachment)M 12x1: 60 Ncm, hand-tight

Safety & Environmental Compliance

RoHS Compliantyes

Notes

Protection Degree / IP Rating Note** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.

Documentation

Data Sheets

View AllClose

Related Products