M12 F&B (PVC) Sensor/Actuator Single-Ended Cordset: Male, straight, 4-pin, A-coded, orange body, 230 V AC/DC, 4 A; PVC black cable, 4-wires, 0.25 mm²
Specifications
Specifications
Face View
Pin 1 | Pin 2 | Pin 3 | Pin 4 |
---|
brown | white | blue | black |
Product Family | Sensor / Actuator Connectors |
---|
Product Sub Family | M12 F&B (PVC) |
---|
Connector Type | Cordset, single ended |
---|
Type of Contact / Gender | Male |
---|
Connector Design | Straight |
---|
Number of Pins | 4 |
---|
Coding | A |
---|
Shielding | Unshielded |
---|
Attachment Type | Coupling Screw |
---|
Rated Voltage | 250 V |
---|
Rated Impulse Voltage | 2.5 kV |
---|
Operating Voltage | 230 V AC/DC |
---|
Rated Current* | 4 A |
---|
Contact Resistance | ≤ 10 mOhm |
---|
Insulation Resistance | ˃ 10^9 Ohm |
---|
Mating Cycles | ≤ 100 |
---|
Ambient Temperature (Operation)* | - 25 °C - + 50 °C |
---|
Protection Degree / IP Rating** | IP65, IP67 |
---|
Design Standard | IEC 61076-2-101 |
---|
Pollution Degree | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Overvoltage Category | II acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Materials
Contact Base Material | CuZn |
---|
Contact Plating | Cu/Au |
---|
Contact Bearer Material | PVC |
---|
Contact Bearer Color | Orange |
---|
Molded Body Material | PVC |
---|
Molded Body Color | Orange |
---|
Attachment Material | Stainless Steel |
---|
Circuitry
Fastening Torque (Attachment) | M 12x1: (50-60) Ncm, hand-tight |
---|
Cable Data
Cable Number | 096 |
---|
Conductor Size | 0.25 mm² |
---|
Number of Wires | 4 |
---|
Minimal Bending Radius (Fixed Inst) | ˃ 5 x D |
---|
Minimal Bending Radius (Flexible Inst) | ˃ 10 x D |
---|
Conductor material | Cu |
---|
Cable Jacket Material | PVC class 43 |
---|
Cable Jacket Color | black |
---|
Cable Diameter D | ø 5.0 ± 0.2 mm |
---|
Wire Insulation Material | PVC class 43 |
---|
Insulated Wire Diameter | ø 1.30 mm |
---|
Ambient Temperature (Fixed Installation) | - 40 °C - + 90 °C |
---|
Ambient Temperature (Flex Installation) | + 5 °C - + 90 °C |
---|
UL Cable Type | AWM: 2654 |
---|
Flammability Class (Cable Jacket) | DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1 |
---|
Cable Characteristics | Mainly plasticizer diffusion free; LABS-free of lacquer wetting disturbing substances; Exclusion of silicone |
---|
Safety & Environmental Compliance
Resistances
Oil Resistance | Good chemical and oil resistance |
---|
Notes
Note Derating | Notice derating |
---|
Protection Degree / IP Rating Note | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
---|
Note | Do not connect or disconnect under load. |
---|
Documentation
Product Bulletins
Technical Information
Data Sheets