Belden

RKMW 3-338 - M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, angled, 3-pin, A-coded, translucent body, 50 V AC / 60 V DC, 2 A; PUR black cable, 3-wires, 0.14 mm²

(No reviews yet) Write a Review
SKU:
RKMW 3-338
Shipping:
Calculated at Checkout
$0.00

Description

M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, angled, 3-pin, A-coded, translucent body, 50 V AC / 60 V DC, 2 A; PUR black cable, 3-wires, 0.14 mm²

Specifications

Specifications

Face View

Pin 1Pin 3Pin 4
brownblueblack
Product FamilySensor / Actuator Connectors
Product Sub FamilyM8 Snap-In
Connector TypeCordset, single ended
Type of Contact / GenderFemale
Connector DesignAngled
Number of Pins3
CodingA
ShieldingUnshielded
Attachment TypeSnap-Locking
Rated Voltage60 V
Rated Voltage (UL)30 V AC/DC
Rated Impulse Voltage1.5 kV
Operating Voltage50 V AC / 60 V DC
Rated Current*2 A
Rated Current (UL)*2 A
Contact Resistance≤ 10 mOhm
Insulation Resistance˃ 10^9 Ohm
Mating Cycles≤ 100
Ambient Temperature (Operation)*- 40 °C - + 90 °C
Operating Temperature (UL)max. + 70 °C
Protection Degree / IP Rating**IP65
Design StandardIEC 61076-2-104
Pollution Degree3 acc. to DIN EN 60664-1 (VDE 0110-1)
Overvoltage CategoryIII acc. to DIN EN 60664-1 (VDE 0110-1)

Materials

Contact Base MaterialCuSn
Contact PlatingCu/Au
Contact Bearer MaterialTPU
Contact Bearer ColorOrange
Flammability Class (Contact Bearer)UL 94 HB
Molded Body MaterialTPU
Molded Body ColorTranslucent
Flammability Class (Molded Body)UL 94 HB

Cable Data

Cable Number338
Conductor Size0.14 mm²
Number of Wires3
Minimal Bending Radius (Fixed Inst)˃ 3 x D
Minimal Bending Radius (Flexible Inst)˃ 10 x D
Cycles (Bending)˃ 2 M
Cycles (Torsion)˃ 2 M @ ± 270 °/10 cm
Conductor materialCu
Cable Jacket MaterialPUR
Cable Jacket Colorblack
Cable Diameter Dø 2.90 ± 0.15 mm
Wire Insulation MaterialPP
Insulated Wire Diameterø 0.90 mm
Ambient Temperature (Fixed Installation)- 50 °C - + 80 °C
Ambient Temperature (Flex Installation)- 25 °C - + 80 °C
Ambient Temperature (Drag Chain Inst)max. + 60 °C
UL Cable TypeAWM: 20549
Flammability Class (Cable Jacket)DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2
Cable CharacteristicsGood microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility

Approvals

UL-FileE315587
ULUL 2238; cURus

Safety & Environmental Compliance

RoHS Compliantyes

Resistances

HalogenfreeDIN EN 50267-2-1, IEC 60754-1, VDE 0482-267
Oil ResistanceGood chemical and oil resistance

Notes

Note DeratingNotice derating
Protection Degree / IP Rating Note** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
NoteDo not connect or disconnect under load.
View AllClose

Additional Information

Variant_Options:
Item #|Item Description|Cable Length
Variant_Options 88673:
88673|RKMW 3-338/3 M|3 m
Variant_Options 70114:
70114|RKMW 3-338/5 M|5 m
View AllClose

Related Products

RSM 3-RKMW 3-224 - Sensor/Actuator Double-Ended Cordset: Male straight A-coded translucent 3-pin M8 Snap-In connector to female angled A-coded translucent 3-pin M8 Snap-In connector, 50 V AC / 60 V DC, 4 A; PUR black cable, 3-wires, 0.34 mm²
Choose Options

RSM 3-RKMW 3-224 - Sensor/Actuator Double-Ended Cordset: Male straight A-coded translucent 3-pin M8 Snap-In connector to female angled A-coded translucent 3-pin M8 Snap-In connector, 50 V AC / 60 V DC, 4 A; PUR black cable, 3-wires, 0.34 mm²

Belden

$0.00
Sensor/Actuator Double-Ended Cordset: Male straight A-coded translucent 3-pin M8 Snap-In connector to female angled A-coded translucent 3-pin M8 Snap-In connector, 50 V AC / 60 V DC, 4 A; PUR black...
RSM 3-RKMW 3-224