M12 Standard Sensor/Actuator Single-Ended Cordset: Female, straight, 4-pin, A-coded, translucent body, 230 V AC/DC, 4 A; PUR black cable, 4-wires, 0.34 mm²
Specifications
Specifications
Face View
| Pin 1 | Pin 2 | Pin 3 | Pin 4 | 
|---|
| brown | white | blue | black | 
| Product Family | Sensor / Actuator Connectors | 
|---|
| Product Sub Family | M12 Standard | 
|---|
| Connector Type | Cordset, single ended | 
|---|
| Type of Contact / Gender | Female | 
|---|
| Connector Design | Straight | 
|---|
| Number of Pins | 4 | 
|---|
| Coding | A | 
|---|
| Shielding | Unshielded | 
|---|
| Attachment Type | Coupling Nut | 
|---|
| Rated Voltage | 250 V | 
|---|
| Rated Voltage (UL) | 250 V AC | 
|---|
| Rated Impulse Voltage | 2.5 kV | 
|---|
| Operating Voltage | 230 V AC/DC | 
|---|
| Rated Current* | 4 A | 
|---|
| Rated Current (UL)* | 4 A | 
|---|
| Contact Resistance | ≤ 10 mOhm | 
|---|
| Insulation Resistance | ˃ 10^9 Ohm | 
|---|
| Mating Cycles | ≤ 100 | 
|---|
| Ambient Temperature (Operation)* | - 40 °C - + 90 °C | 
|---|
| Operating Temperature (UL) | max. + 50 °C | 
|---|
| Protection Degree / IP Rating** | IP65, IP67, IP68 (1 m / 24 h), IP69K | 
|---|
| Design Standard | IEC 61076-2-101 | 
|---|
| Pollution Degree | 3 acc. to DIN EN 60664-1 (VDE 0110-1) | 
|---|
| Overvoltage Category | II acc. to DIN EN 60664-1 (VDE 0110-1) | 
|---|
Materials
| Contact Base Material | CuSn | 
|---|
| Contact Plating | Cu/Au | 
|---|
| Contact Bearer Material | TPU | 
|---|
| Contact Bearer Color | Orange | 
|---|
| Flammability Class (Contact Bearer) | UL 94 HB | 
|---|
| Molded Body Material | TPU | 
|---|
| Molded Body Color | Translucent | 
|---|
| Flammability Class (Molded Body) | UL 94 HB | 
|---|
| Attachment Material | CuZn | 
|---|
| Attachment Plating | Nickel-plated | 
|---|
| O-Ring Material | FKM, green | 
|---|
Circuitry
| Fastening Torque (Attachment) | M 12x1: (50-60) Ncm, hand-tight | 
|---|
Cable Data
| Cable Number | 288 | 
|---|
| Conductor Size | 0.34 mm² | 
|---|
| Number of Wires | 4 | 
|---|
| Minimal Bending Radius (Fixed Inst) | ˃ 5 x D | 
|---|
| Minimal Bending Radius (Flexible Inst) | ˃ 10 x D | 
|---|
| Cycles (Bending) | ˃ 5 M | 
|---|
| Cycles (Torsion) | ˃ 1 M @ ± 180 °/1 m | 
|---|
| Conductor material | Cu | 
|---|
| Cable Jacket Material | PUR | 
|---|
| Cable Jacket Color | black | 
|---|
| Cable Diameter D | ø 5.50 ± 0.20 mm | 
|---|
| Wire Insulation Material | PP | 
|---|
| Insulated Wire Diameter | ø 1.30 mm | 
|---|
| Overall Shield (Cable) | Mesh wire | 
|---|
| Ambient Temperature (Fixed Installation) | - 50 °C - + 80 °C | 
|---|
| Ambient Temperature (Flex Installation) | - 25 °C - + 80 °C | 
|---|
| Ambient Temperature (Drag Chain Inst) | - 25 °C - + 60 °C | 
|---|
| UL Cable Type | AWM: 20549 | 
|---|
| Flammability Class (Cable Jacket) | DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2 | 
|---|
| Cable Characteristics | Free of lacquer wetting disturbing substances; Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility | 
|---|
Approvals
| UL-File | E315587 | 
|---|
| UL | UL 2238; cURus | 
|---|
Safety & Environmental Compliance
Resistances
| Halogenfree | DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1 | 
|---|
| Oil Resistance | Good chemical and oil resistance | 
|---|
Notes
| Note Derating | Notice derating | 
|---|
| Protection Degree / IP Rating Note | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. | 
|---|
| Note | Do not connect or disconnect under load. | 
|---|
Documentation
Product Bulletins
Technical Information
Data Sheets