Belden
RSE 3U - M12 Insert Sensor/Actuator Receptacle Connector: Male, insert with O-ring, M12 - mating side, solder contacts - connecting side, 3-pin, U (M12)-coded, unshielded, black body, 230 V AC/DC, 4 A
- SKU:
- RSE 3U
- Shipping:
- Calculated at Checkout
Description
M12 Insert Sensor/Actuator Receptacle Connector: Male, insert with O-ring, M12 - mating side, solder contacts - connecting side, 3-pin, U (M12)-coded, unshielded, black body, 230 V AC/DC, 4 A
Specifications
Specifications
Product Family | Sensor / Actuator Connectors |
---|---|
Product Sub Family | M12 Insert |
Mating Side | M12 |
Connecting Side | Solder Contacts |
Connector Type | Receptacle |
Type of Contact / Gender | Male |
Connector Design | Insert with O-ring |
Number of Pins | 3 |
Coding | U (M12) |
Rated Voltage | 250 V |
Rated Voltage (UL) | AWG 22&24: 300 V AC/DC; AWG 26: 30 V AC/DC |
Rated Impulse Voltage | 2.5 kV |
Operating Voltage | 230 V AC/DC |
Rated Current* | 4 A |
Rated Current (UL)* | AWG 22&24: 4 A; AWG 26: 2 A |
Contact Resistance | ≤ 10 mOhm |
Insulation Resistance | ˃ 10^9 Ohm |
Mating Cycles | ≤ 100 |
Type of Connection | Solder |
Suitable Conductor Cross Section | Solid wires: 0.22 mm² to 0.75 mm² / Standed wires: 0.22 mm² to 0.5 mm² |
Ambient Temperature (Operation)* | - 25 °C - + 85 °C |
Operating Temperature (UL) | max. + 50 °C |
Protection Degree / IP Rating** | IP65, IP67 |
Design Standard | IEC 61076-2-101 |
Pollution Degree | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
Clearance / Creepage Distance | DIN EN 60664-1 (2008/01); VDE 0110-1 |
Overvoltage Category | II acc. to DIN EN 60664-1 (VDE 0110-1) |
Materials
Contact Base Material | CuZn |
---|---|
Contact Plating | Cu/Au |
Contact Bearer Material | PA |
Contact Bearer Color | Black |
Flammability Class (Contact Bearer) | UL 94 V-0 |
Potted | No |
O-Ring Material | FKM |
Approvals
UL-File | E315587 |
---|---|
UL | cURus |
Safety & Environmental Compliance
RoHS Compliant | yes |
---|
Notes
Note Derating | * Notice derating |
---|---|
Protection Degree / IP Rating Note | * only if mounted and locked in combination with Hirschmann / Lumberg connector. On the installation side tightness has to be assured by taking proper measures. |
Note | The receptacle connector is constructively intended for usage in IP67-products. To realise this protection class, the estimated location has to be designed accordingly. Further details see IEC 61076-2-101. If the receptacle connector is installed in a metal housing, the requirements according to DIN EN 61140 must be observed for use as protection class II equipment at the planned location. |
UL Note | The receptacle connector is constructively intended for usage in IP67-products. To realise this protection class, the estimated location has to be designed accordingly. Further details see IEC 61076-2-101 If the receptacle connector is installed in a metal housing, the requirements according to DIN EN 61140 must be observed for use as protection class II equipment at the planned location. |
Documentation
Product Bulletins
- Lumberg Automation Sensor/Actuator Washdown Connectors
- Lumberg Automation Actuator Sensor Interface Modules
- Lumberg Automation High-Density M8 Actuator Sensor Connectors
- Lumberg Automation M8 5-Pole B-Coded Sensor/Actuator Connectors
- M12 T-Splitter
Technical Information
Data Sheets
Additional Information
Variant_Options: |
Item #|Item Description |
Variant_Options 11607: |
11607|RSE 3U |