Belden

RSE 5 L - M12 Insert Sensor/Actuator Receptacle Connector: Male, insert with O-ring and ventilation hole, M12 - mating side, solder contacts - connecting side, 5-pin, A-coded, unshielded, black body, 50 V AC / 60 V DC, 4 A

(No reviews yet) Write a Review
SKU:
RSE 5 L
Shipping:
Calculated at Checkout
$0.00

Description

M12 Insert Sensor/Actuator Receptacle Connector: Male, insert with O-ring and ventilation hole, M12 - mating side, solder contacts - connecting side, 5-pin, A-coded, unshielded, black body, 50 V AC / 60 V DC, 4 A

Specifications

Specifications

Product FamilySensor / Actuator Connectors
Product Sub FamilyM12 Insert
Mating SideM12
Connecting SideSolder Contacts
Connector TypeReceptacle
Type of Contact / GenderMale
Connector DesignInsert with O-ring and ventilation hole
Number of Pins5
CodingA
Rated Voltage60 V
Rated Voltage (UL)30 V AC/DC
Rated Impulse Voltage1.5 kV
Operating Voltage50 V AC / 60 V DC
Rated Current*4 A
Rated Current (UL)*AWG 22&24: 4 A; AWG 26: 2 A
Contact Resistance≤ 10 mOhm
Insulation Resistance˃ 10^9 Ohm
Mating Cycles≤ 100
Type of ConnectionSolder
Suitable Conductor Cross SectionSolid wires: 0.22 mm² to 0.75 mm² / Standed wires: 0.22 mm² to 0.5 mm²
Ambient Temperature (Operation)*- 25 °C - + 85 °C
Operating Temperature (UL)max. + 50 °C
Protection Degree / IP Rating**IP65, IP67
Design StandardIEC 61076-2-101
Pollution Degree3 acc. to DIN EN 60664-1 (VDE 0110-1)
Clearance / Creepage DistanceDIN EN 60664-1 (2008/01); VDE 0110-1
Overvoltage CategoryIII acc. to DIN EN 60664-1 (VDE 0110-1)

Materials

Contact Base MaterialCuZn
Contact PlatingCu/Au
Contact Bearer MaterialPA
Contact Bearer ColorBlack
Flammability Class (Contact Bearer)UL 94 V-0
PottedNo
O-Ring MaterialFKM

Approvals

UL-FileE315587
ULcURus

Safety & Environmental Compliance

RoHS Compliantyes

Notes

Note Derating* Notice derating
Protection Degree / IP Rating Note* only if mounted and locked in combination with Hirschmann / Lumberg connector. On the installation side tightness has to be assured by taking proper measures.
NoteThe receptacle connector is constructively intended for usage in IP67-products. To realise this protection class, the estimated location has to be designed accordingly. Further details see IEC 61076-2-101.
UL NoteThe receptacle connector is constructively intended for usage in IP67-products. To realise this protection class, the estimated location has to be designed accordingly. Further details see IEC 61076-2-101
View AllClose

Additional Information

Variant_Options:
Item #|Item Description
Variant_Options 11614:
11614|RSE 5 L
View AllClose