Belden

RST 4-251 - M12 Standard Sensor/Actuator Single-Ended Cordset: Male, straight, 4-pin, A-coded, translucent body, 230 V AC/DC, 4 A; PUR orange cable, 4-wires, 0.34 mm²

(No reviews yet) Write a Review
SKU:
RST 4-251
Shipping:
Calculated at Checkout
$0.00

Description

M12 Standard Sensor/Actuator Single-Ended Cordset: Male, straight, 4-pin, A-coded, translucent body, 230 V AC/DC, 4 A; PUR orange cable, 4-wires, 0.34 mm²

Specifications

Specifications

Face View

Pin 1Pin 2Pin 3Pin 4
brownwhiteblueblack
Product FamilySensor / Actuator Connectors
Product Sub FamilyM12 Standard
Connector TypeCordset, single ended
Type of Contact / GenderMale
Connector DesignStraight
Number of Pins4
CodingA
ShieldingUnshielded
Attachment TypeCoupling Screw
Rated Voltage250 V
Rated Voltage (UL)250 V AC
Rated Impulse Voltage2.5 kV
Operating Voltage230 V AC/DC
Rated Current*4 A
Rated Current (UL)*4 A
Contact Resistance≤ 10 mOhm
Insulation Resistance˃ 10^9 Ohm
Mating Cycles≤ 100
Ambient Temperature (Operation)*- 40 °C - + 90 °C
Operating Temperature (UL)max. + 50 °C
Protection Degree / IP Rating**IP65, IP67, IP68 (1 m / 24 h), IP69K
Design StandardIEC 61076-2-101
Pollution Degree3 acc. to DIN EN 60664-1 (VDE 0110-1)
Overvoltage CategoryII acc. to DIN EN 60664-1 (VDE 0110-1)

Materials

Contact Base MaterialCuSn
Contact PlatingCu/Au
Contact Bearer MaterialTPU
Contact Bearer ColorOrange
Flammability Class (Contact Bearer)UL 94 HB
Molded Body MaterialTPU
Molded Body ColorTranslucent
Flammability Class (Molded Body)UL 94 HB
Attachment MaterialCuZn
Attachment PlatingNickel-plated

Circuitry

Fastening Torque (Attachment)M 12x1: (50-60) Ncm, hand-tight

Cable Data

Cable Number251
Conductor Size0.34 mm²
Number of Wires4
Minimal Bending Radius (Fixed Inst)˃ 5 x D
Minimal Bending Radius (Flexible Inst)˃ 10 x D
Cycles (Bending)˃ 5 M
Cycles (Torsion)˃ 5 M @ ± 360 °/1 m
Welding ResistanceWelding spark resistant
Conductor materialCu
Cable Jacket MaterialPUR
Cable Jacket Colororange
Cable Diameter Dø 4.70 ± 0.15 mm
Wire Insulation MaterialPP
Insulated Wire Diameterø 1.30 mm
Ambient Temperature (Fixed Installation)- 50 °C - + 80 °C
Ambient Temperature (Flex Installation)- 25 °C - + 80 °C
Ambient Temperature (Drag Chain Inst)- 25 °C - + 60 °C
UL Cable TypeAWM: 20549
Flammability Class (Cable Jacket)DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2
Cable CharacteristicsFree of lacquer wetting disturbing substances; Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Seatwater resistance; Coldness flexibility

Approvals

UL-FileE315587
ULUL 2238; cURus

Safety & Environmental Compliance

RoHS Compliantyes

Resistances

HalogenfreeDIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1
Oil ResistanceDIN EN 60811-2-1

Notes

Note DeratingNotice derating
Protection Degree / IP Rating Note** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
NoteDo not connect or disconnect under load.
View AllClose

Additional Information

Variant_Options:
Item #|Item Description|Cable Length|Rated Current
Variant_Options 2527:
2527|RST 4-251/20 M|20 m|4 A
Variant_Options 3381:
3381|RST 4-251/15 M|15 m|4 A
Variant_Options 11811:
11811|RST 4-251/2 M|2 m|4 A
Variant_Options 46902:
46902|RST 4-251/10 M|10 m|4 A
Variant_Options 11812:
11812|RST 4-251/5 M|5 m|4 A
View AllClose