Sensor/Actuator Double-Ended Cordset: Male straight A-coded yellow 4-pin M12 Standard connector to female angled A-coded yellow 4-pin M12 Standard connector, 230 V AC/DC, 4 A; PUR yellow cable, 4-wires, 0.824 mm²
Specifications
Specifications
Face View Side 1
Pin 1 | Pin 2 | Pin 3 | Pin 4 |
---|
brown | white | blue | black |
Face View Side 2
Pin 1 | Pin 2 | Pin 3 | Pin 4 |
---|
brown | white | blue | black |
Product Family | Sensor / Actuator Connectors |
---|
Connector Type | Cordset, double ended |
---|
Shielding | Unshielded |
---|
Rated Voltage | 250 V |
---|
Rated Impulse Voltage | 2.5 kV |
---|
Operating Voltage | 230 V AC/DC |
---|
Rated Current* | 4 A |
---|
Technical Data Side 1
Product Sub Family | M12 Standard |
---|
Type of Contact / Gender | Male |
---|
Connector Design | Straight |
---|
Attachment Type | Coupling Screw |
---|
Number of Pins | 4 |
---|
Coding | A |
---|
Contact Resistance | ≤ 10 mOhm |
---|
Insulation Resistance | ˃ 10^9 Ohm |
---|
Mating Cycles | ≤ 100 |
---|
Ambient Temperature (Operation)* | - 40 °C - + 90 °C |
---|
Protection Degree / IP Rating** | IP65, IP67, IP68 (1 m / 24 h), IP69K |
---|
Design Standard | IEC 61076-2-101 |
---|
Pollution Degree | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Overvoltage Category | II acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Contact Base Material | CuZn |
---|
Contact Plating | Cu/Au |
---|
Contact Bearer Material | TPU-GF |
---|
Contact Bearer Color | Yellow |
---|
Flammability Class (Contact Bearer) | UL 94 HB |
---|
Molded Body Material | TPU |
---|
Molded Body Color | Yellow |
---|
Flammability Class (Molded Body) | UL 94 HB |
---|
Attachment Material | CuZn |
---|
Attachment Plating | Nickel-plated |
---|
Fastening Torque (Attachment) | M 12x1: (50-60) Ncm, hand-tight |
---|
Note | Do not connect or disconnect under load. |
---|
Cable Data
Cable Number | 798 |
---|
Conductor Size | 0.824 mm² |
---|
Number of Wires | 4 |
---|
Minimal Bending Radius (Fixed Inst) | ˃ 5 x D |
---|
Minimal Bending Radius (Flexible Inst) | ˃ 10 x D |
---|
Conductor material | Cu |
---|
Cable Jacket Material | PUR |
---|
Cable Jacket Color | yellow matt similarly RAL 1021 |
---|
Cable Diameter D | ø 5.85 ± 0.20 mm |
---|
Wire Insulation Material | PVC class 43 |
---|
Insulated Wire Diameter | ø 1.80 ± 0.05 mm |
---|
Ambient Temperature (Fixed Installation) | - 45 °C - + 80 °C |
---|
Ambient Temperature (Flex Installation) | - 20 °C - + 80 °C |
---|
Flammability Class (Cable Jacket) | DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL-VW1, CSA FT1 |
---|
Cable Characteristics | Free of lacquer wetting disturbing substances; Good microbes and hydrolysis resistance; Good chemical and oil resistance; Exclusion of silicone; Coldness flexibility |
---|
Technical Data Side 2
Product Sub Family, Side 2 | M12 Standard |
---|
Type of Contact / Gender, Side 2 | Female |
---|
Connector Design, Side 2 | Angled |
---|
Attachment Type, Side 2 | Coupling Nut |
---|
Number of Pins, Side 2 | 4 |
---|
Coding, Side 2 | A |
---|
Contact Resistance, Side 2 | ≤ 10 mOhm |
---|
Insulation Resistance, Side 2 | ˃ 10^9 Ohm |
---|
Mating Cycles, Side 2 | ≤ 100 |
---|
Ambient Temperature (Operation), Side 2* | - 40 °C - + 90 °C |
---|
Protection Degree / IP Rating, Side 2** | IP65, IP67, IP68 (1 m / 24 h), IP69K |
---|
Design Standard, Side 2 | IEC 61076-2-101 |
---|
Pollution Degree, Side 2 | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Overvoltage Category, Side 2 | II acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Contact Base Material, Side 2 | CuZn |
---|
Contact Plating, Side 2 | Cu/Au |
---|
Contact Bearer Material, Side 2 | TPU |
---|
Contact Bearer Color, Side 2 | Black |
---|
Flammability Class (Contact Bearer), Side 2 | UL 94 HB |
---|
Molded Body Material, Side 2 | TPU |
---|
Molded Body Color, Side 2 | Yellow |
---|
Flammability Class (Molded Body), Side 2 | UL 94 HB |
---|
Attachment Material, Side 2 | CuZn |
---|
Attachment Plating, Side 2 | Nickel-plated |
---|
O-Ring Material, Side 2 | FKM, green |
---|
Fastening Torque (Attachment), Side 2 | M 12x1: (50-60) Ncm, hand-tight |
---|
Safety & Environmental Compliance
Resistances
Oil Resistance | Good chemical and oil resistance |
---|
Notes
Protection Degree / IP Rating Note | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
---|
Note Derating | Notice derating |
---|
Documentation
Product Bulletins
Technical Information
Data Sheets