M12 Standard Sensor/Actuator Single-Ended Cordset: Male, angled, 12-pin, A-coded, translucent body, 30 V AC/DC, 1.5 A; PUR black cable, 12-wires, 0.25 mm²
Specifications
Specifications
Face View
Pin 1 | Pin 2 | Pin 3 | Pin 4 | Pin 5 | Pin 6 | Pin 7 | Pin 8 | Pin 9 | Pin 10 | Pin 11 | Pin 12 |
---|
brown | blue | white | green | pink | yellow | black | grey | red | purple | grey-pink | red-blue |
Product Family | Sensor / Actuator Connectors |
---|
Product Sub Family | M12 Standard |
---|
Connector Type | Cordset, single ended |
---|
Type of Contact / Gender | Male |
---|
Connector Design | Angled |
---|
Number of Pins | 12 |
---|
Coding | A |
---|
Shielding | Unshielded |
---|
Attachment Type | Coupling Screw |
---|
Rated Voltage | 30 V |
---|
Rated Impulse Voltage | 0.8 kV |
---|
Operating Voltage | 30 V AC/DC |
---|
Rated Current* | 1.5 A |
---|
Contact Resistance | ≤ 10 mOhm |
---|
Insulation Resistance | ˃ 10^9 Ohm |
---|
Mating Cycles | ≤ 100 |
---|
Ambient Temperature (Operation)* | - 25 °C - + 90 °C |
---|
Protection Degree / IP Rating** | IP65, IP67 |
---|
Design Standard | IEC 61076-2-101 |
---|
Pollution Degree | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Overvoltage Category | III acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Materials
Contact Base Material | CuZn |
---|
Contact Plating | Cu/Au |
---|
Contact Bearer Material | PBT |
---|
Contact Bearer Color | Orange |
---|
Flammability Class (Contact Bearer) | UL 94 HB |
---|
Molded Body Material | TPU |
---|
Molded Body Color | Translucent |
---|
Flammability Class (Molded Body) | UL 94 HB |
---|
Attachment Material | CuZn |
---|
Attachment Plating | Nickel-plated |
---|
Circuitry
Fastening Torque (Attachment) | M 12x1: (50-60) Ncm, hand-tight |
---|
Cable Data
Cable Number | 346 |
---|
Conductor Size | 0.25 mm² |
---|
Number of Wires | 12 |
---|
Minimal Bending Radius (Fixed Inst) | ˃ 5 x D |
---|
Minimal Bending Radius (Flexible Inst) | ˃ 10 x D |
---|
Cycles (Bending) | ˃ 2 M |
---|
Conductor material | Cu |
---|
Cable Jacket Material | PUR |
---|
Cable Jacket Color | black matt similarly RAL 9005 |
---|
Cable Diameter D | ø 6.40 ± 0.20 mm |
---|
Wire Insulation Material | PP |
---|
Insulated Wire Diameter | ø 1.20 ± 0.05 mm |
---|
Ambient Temperature (Fixed Installation) | - 50 °C - + 80 °C |
---|
Ambient Temperature (Flex Installation) | - 25 °C - + 80 °C |
---|
Ambient Temperature (Drag Chain Inst) | - 25 °C - + 60 °C |
---|
UL Cable Type | AWM: 20549 |
---|
Flammability Class (Cable Jacket) | DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2 |
---|
Cable Characteristics | Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; LABS-free of lacquer wetting disturbing substances; Coldness flexibility |
---|
Safety & Environmental Compliance
Resistances
Halogenfree | DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1 |
---|
Oil Resistance | Good chemical and oil resistance |
---|
Notes
Note Derating | Notice derating |
---|
Protection Degree / IP Rating Note | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
---|
Note | Do not connect or disconnect under load. |
---|
Documentation
Product Bulletins
Technical Information
Data Sheets