Sensor/Actuator Double-Ended Cordset: Male straight A-coded white 5-pin M12 F&B (Wash-Down) connector to female straight A-coded white 5-pin M12 F&B (Wash-Down) connector, 50 V AC / 60 V DC, 4 A; TPE orange cable, 5-wires, 0.25 mm²
Specifications
Specifications
Face View Side 1
Pin 1 | Pin 2 | Pin 3 | Pin 4 | Pin 5 |
---|
brown | white | blue | black | grey |
Face View Side 2
Pin 1 | Pin 2 | Pin 3 | Pin 4 | Pin 5 |
---|
brown | white | blue | black | grey |
Product Family | Sensor / Actuator Connectors |
---|
Connector Type | Cordset, double ended |
---|
Shielding | Unshielded |
---|
Rated Voltage | 60 V |
---|
Rated Voltage (UL) | 30 V AC/DC |
---|
Rated Impulse Voltage | 1.5 kV |
---|
Operating Voltage | 50 V AC / 60 V DC |
---|
Rated Current* | 4 A |
---|
Rated Current (UL)* | 4 A |
---|
Technical Data Side 1
Product Sub Family | M12 F&B (Wash-Down) |
---|
Type of Contact / Gender | Male |
---|
Connector Design | Straight |
---|
Attachment Type | Coupling Screw |
---|
Number of Pins | 5 |
---|
Coding | A |
---|
Contact Resistance | ≤ 10 mOhm |
---|
Insulation Resistance | ˃ 10^9 Ohm |
---|
Mating Cycles | ≤ 100 |
---|
Ambient Temperature (Operation)* | - 40 °C - + 105 °C |
---|
Operating Temperature (UL) | max. + 65 °C |
---|
Protection Degree / IP Rating** | IP65, IP67, IP68 (1 m / 24 h), IP69K |
---|
Design Standard | IEC 61076-2-101 |
---|
Pollution Degree | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Overvoltage Category | III acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Contact Base Material | CuSn |
---|
Contact Plating | Cu/Au |
---|
Contact Bearer Material | PP-GF |
---|
Contact Bearer Color | White |
---|
Flammability Class (Contact Bearer) | UL 94 HB |
---|
Molded Body Material | PP-GF |
---|
Molded Body Color | White |
---|
Flammability Class (Molded Body) | UL 94 HB |
---|
Attachment Material | Stainless Steel |
---|
Fastening Torque (Attachment) | M 12x1: (50-60) Ncm, hand-tight |
---|
Note | Do not connect or disconnect under load. |
---|
Cable Data
Cable Number | 522 |
---|
Conductor Size | 0.25 mm² |
---|
Number of Wires | 5 |
---|
Minimal Bending Radius (Fixed Inst) | ˃ 5 x D |
---|
Minimal Bending Radius (Flexible Inst) | ˃ 10 x D |
---|
Cycles (Bending) | ˃ 2 M |
---|
Conductor material | Cu |
---|
Cable Jacket Material | TPE-V-compound, flame retardent |
---|
Cable Jacket Color | orange |
---|
Cable Diameter D | ø 5.0 ± 0.20 mm |
---|
Wire Insulation Material | PP |
---|
Insulated Wire Diameter | ø 1.25 mm |
---|
Ambient Temperature (Fixed Installation) | - 40 °C - + 90 °C |
---|
Ambient Temperature (Flex Installation) | - 25 °C - + 90 °C |
---|
Ambient Temperature (Drag Chain Inst) | - 25 °C - + 60 °C |
---|
UL Cable Type | AWM: 21484 |
---|
Flammability Class (Cable Jacket) | UL horizontal flame test, flame-retardant |
---|
Cable Characteristics | Free of silicone; Free of FCKW; Free offcadmium and lead; Microbe and hydrolysis resistant |
---|
Technical Data Side 2
Product Sub Family, Side 2 | M12 F&B (Wash-Down) |
---|
Type of Contact / Gender, Side 2 | Female |
---|
Connector Design, Side 2 | Straight |
---|
Attachment Type, Side 2 | Coupling Nut |
---|
Number of Pins, Side 2 | 5 |
---|
Coding, Side 2 | A |
---|
Contact Resistance, Side 2 | ≤ 10 mOhm |
---|
Insulation Resistance, Side 2 | ˃ 10^9 Ohm |
---|
Mating Cycles, Side 2 | ≤ 100 |
---|
Ambient Temperature (Operation), Side 2* | - 40 °C - + 105 °C |
---|
Operating Temperature (UL), Side 2 | max. + 65 °C |
---|
Protection Degree / IP Rating, Side 2** | IP65, IP67, IP68 (1 m / 24 h), IP69K |
---|
Design Standard, Side 2 | IEC 61076-2-101 |
---|
Pollution Degree, Side 2 | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Overvoltage Category, Side 2 | III acc. to DIN EN 60664-1 (VDE 0110-1) |
---|
Contact Base Material, Side 2 | CuSn |
---|
Contact Plating, Side 2 | Cu/Au |
---|
Contact Bearer Material, Side 2 | PP-GF |
---|
Contact Bearer Color, Side 2 | White |
---|
Flammability Class (Contact Bearer), Side 2 | UL 94 HB |
---|
Molded Body Material, Side 2 | PP-GF |
---|
Molded Body Color, Side 2 | White |
---|
Flammability Class (Molded Body), Side 2 | UL 94 HB |
---|
Attachment Material, Side 2 | Stainless Steel |
---|
O-Ring Material, Side 2 | EPDM, black |
---|
Fastening Torque (Attachment), Side 2 | M 12x1: (50-60) Ncm, hand-tight |
---|
Approvals
UL-File | E315587 |
---|
UL | UL 2238; cURus |
---|
Safety & Environmental Compliance
Resistances
ECOLAB | Yes |
---|
Oil Resistance | Good chemical and oil resistance |
---|
Notes
Protection Degree / IP Rating Note | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
---|
Note Derating | Notice derating |
---|
Documentation
Product Bulletins
Technical Information
Data Sheets