Belden
WRSWT 4-521 - M12 F&B (Wash-Down) Sensor/Actuator Single-Ended Cordset: Male, angled, 4-pin, A-coded, white body, 230 V AC/DC, 4 A; TPE orange cable, 4-wires, 0.25 mm²
- SKU:
- WRSWT 4-521
- Shipping:
- Calculated at Checkout
Description
M12 F&B (Wash-Down) Sensor/Actuator Single-Ended Cordset: Male, angled, 4-pin, A-coded, white body, 230 V AC/DC, 4 A; TPE orange cable, 4-wires, 0.25 mm²
Specifications
Specifications
Face View
Pin 1 | Pin 2 | Pin 3 | Pin 4 |
---|---|---|---|
brown | white | blue | black |
Product Family | Sensor / Actuator Connectors |
---|---|
Product Sub Family | M12 F&B (Wash-Down) |
Connector Type | Cordset, single ended |
Type of Contact / Gender | Male |
Connector Design | Angled |
Number of Pins | 4 |
Coding | A |
Shielding | Unshielded |
Attachment Type | Coupling Screw |
Rated Voltage | 250 V |
Rated Voltage (UL) | 30 V AC/DC |
Rated Impulse Voltage | 2.5 kV |
Operating Voltage | 230 V AC/DC |
Rated Current* | 4 A |
Rated Current (UL)* | 4 A |
Contact Resistance | ≤ 10 mOhm |
Insulation Resistance | ˃ 10^9 Ohm |
Mating Cycles | ≤ 100 |
Ambient Temperature (Operation)* | - 40 °C - + 105 °C |
Operating Temperature (UL) | max. + 65 °C |
Protection Degree / IP Rating** | IP65, IP67, IP68 (1 m / 24 h), IP69K |
Design Standard | IEC 61076-2-101 |
Pollution Degree | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
Overvoltage Category | II acc. to DIN EN 60664-1 (VDE 0110-1) |
Materials
Contact Base Material | CuSn |
---|---|
Contact Plating | Cu/Au |
Contact Bearer Material | PP-GF |
Contact Bearer Color | White |
Flammability Class (Contact Bearer) | UL 94 HB |
Molded Body Material | PP-GF |
Molded Body Color | White |
Flammability Class (Molded Body) | UL 94 HB |
Attachment Material | Stainless Steel |
Circuitry
Fastening Torque (Attachment) | M 12x1: (50-60) Ncm, hand-tight |
---|
Cable Data
Cable Number | 521 |
---|---|
Conductor Size | 0.25 mm² |
Number of Wires | 4 |
Minimal Bending Radius (Fixed Inst) | ˃ 5 x D |
Minimal Bending Radius (Flexible Inst) | ˃ 10 x D |
Cycles (Bending) | ˃ 2 M |
Conductor material | Cu |
Cable Jacket Material | TPE-V-compound, flame retardent |
Cable Jacket Color | orange |
Cable Diameter D | ø 4.7 ± 0.20 mm |
Wire Insulation Material | PP |
Insulated Wire Diameter | ø 1.25 mm |
Ambient Temperature (Fixed Installation) | - 40 °C - + 90 °C |
Ambient Temperature (Flex Installation) | - 25 °C - + 90 °C |
Ambient Temperature (Drag Chain Inst) | - 25 °C - + 60 °C |
UL Cable Type | AWM: 21484 |
Flammability Class (Cable Jacket) | UL horizontal flame test, flame-retardant |
Cable Characteristics | Free of silicone; Free of FCKW; Free offcadmium and lead; Microbe and hydrolysis resistant |
Approvals
UL-File | E315587 |
---|---|
UL | UL 2238; cURus |
Safety & Environmental Compliance
RoHS Compliant | yes |
---|
Resistances
ECOLAB | Yes |
---|---|
Oil Resistance | Good chemical and oil resistance |
Notes
Note Derating | Notice derating |
---|---|
Protection Degree / IP Rating Note | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
Note | Do not connect or disconnect under load. |
Documentation
Product Bulletins
- Lumberg Automation Sensor/Actuator Washdown Connectors
- Lumberg Automation Actuator Sensor Interface Modules
- Lumberg Automation High-Density M8 Actuator Sensor Connectors
- Lumberg Automation M8 5-Pole B-Coded Sensor/Actuator Connectors
- M12 T-Splitter
Technical Information
Product Certifications
Data Sheets
Additional Information
Variant_Options: |
Item #|Item Description|Cable Length|Rated Current |
Variant_Options 934736007: |
934736007|WRSWT 4-521/2 M|2 m|4 A |
Variant_Options 934736008: |
934736008|WRSWT 4-521/5 M|5 m|4 A |
Variant_Options 934736009: |
934736009|WRSWT 4-521/10 M|10 m|4 A |
Variant_Options 934736010: |
934736010|WRSWT 4-521/15 M|15 m|4 A |
Variant_Options 934736011: |
934736011|WRSWT 4-521/20 M|20 m|4 A |
Variant_Options 934736012: |
934736012|WRSWT 4-521/25 M|25 m|4 A |