Belden

OCTOPUS 8TX -EEC - Unmanged IP67 Switch, 8 ports, supply voltage 24 VDC, train approvals

(No reviews yet) Write a Review
SKU:
OCTOPUS 8TX -EEC
Shipping:
Calculated at Checkout
$0.00

Description

Unmanaged IP 65 / IP 67 switch in accordance with IEEE 802.3, store-and-forward-switching, Fast-Ethernet (10/100 MBit/s) ports, electrical Fast-Ethernet (10/100 MBit/s) M12-ports

Specifications

Specifications

Product description

TypeOCTOPUS 8TX-EEC
DescriptionThe OCTOPUS switches are suited for outdoor applications with rough environmental conditions. Because of the branch typical approvals they can be used in transport applications (E1), as well as in trains (EN 50155) and ships (GL).
Port type and quantity8 ports in total uplink ports: 10/100 BASE-TX, M12 "D"-coding, 4-pole 8 x 10/100 BASE-TX TP-cable, auto-crossing, auto-negotiation, auto-polarity.

More Interfaces

Power supply/signaling contact1 x M12 5-pin connector, A coding, no signaling contact
USB interface1 x M12 5-pin socket, A coding

Network size - length of cable

Twisted pair (TP)0-100 m

Network size - cascadibility

Line - / star topologyany

Power requirements

Operating Voltage12 / 24 / 36 VDC (9,6 .. 45 VDC)
Power consumption4.2 W
Power output in BTU (IT)/h12.3
Redundancy functionsredundant power supply

Software

DiagnosticsLEDs (power, link status, data)
ConfigurationSwitch: aging time, Qos 802.1p mapping, QoS DSCP mapping. Pro Port: port state, flow control, broadcast mode, multicast mode, jumbo frames,QoS trust mode, port-based priority, auto-negociation, data rate, duplex mode, auto-crossing, MDI state

Ambient conditions

Operating temperature-40-+70 °C
NotePlease note that some recommended accessory parts only support a temperature range from -25 ºC to +70 ºC and might limit the possible operating conditions for the entire system.
Storage/transport temperature-40-+85 °C
Relative humidity (also condensing)5-100 %
Dimensions (WxHxD)60 mm x 200 mm x 31 mm
Weight470 g
MountingWall mounting
Protection classIP65, IP67

Mechanical stability

IEC 60068-2-6 vibration1 mm, 2 Hz-13.2 Hz, 90 min. 0.7 g, 13.2 Hz-100 Hz, 90 min. 3.5 mm, 3 Hz-9 Hz, 10 cycles, 1 octave/min. 1 g, 9 Hz-150 Hz, 10 cycles, 1 octave/min
IEC 60068-2-27 shock15 g, 11 ms duration, 18 shocks

EMC interference immunity

EN 61000-4-2 electrostatic discharge (ESD)6 kV contact discharge, 8 kV air discharge
EN 61000-4-3 electromagnetic field20 V/m (80-3000 MHz)
EN 61000-4-4 fast transients (burst)2 kV power line, 4 kV data line
EN 61000-4-5 surge voltagepower line: 2 kV (line/earth), 1 kV (line/line), 2 kV data line
EN 61000-4-6 Conducted Immunity3 V (10 kHz-150 kHz), 10 V (150 kHz-80 MHz)

EMC emitted immunity

EN 55032EN 55032 Class A
FCC CFR47 Part 15FCC 47CFR Part 15, Class A

Approvals

Basis StandardCE, EAC, Australian Regulatory Compliance Mark (RCM)
Safety of industrial control equipmentcUL61010-2-201
Safety of information technology equipmentEN62368
Hazardous locationsISA 12.12.01 Class 1 Div. 2
Railway normEN 50155, EN 45545-2, EN 50121-4
TransportationE1

Reliability

Guarantee60 months (please refer to the terms of guarantee for detailed information)

Scope of delivery and accessories

Accessories to Order SeparatelyACA22-M12 (EEC) (942 125-001), M12 conector, "D"-coded (934 445-001) 2 m cordset with M12-connector, "D"-coded (934 578-001) 5 m cordset with M12-connectors, "D"-coded (934 578-002) 10 m cordset with M12-connectors, "D"-coded (934 578-003) Bulkhead M12 "D"-coded to RJ45 (934 498-001), OCTOPUS metal dust cover set (25 pieces) (942 057-001), OCTOPUS plastic dust cover set (25 pieces) (942 057-002)*
Scope of delivery1 × Device, 1 × Transport protection cap for supply voltage connection, 7 × Protection cap for M12 socket, 1 x M12-connector (ELWIKA 5012 PG7) for power connection, General safety instructions

Further Instructions

Product Documentationhttps://www.doc.hirschmann.com
Certificateshttps://www.doc.hirschmann.com/certificates.html

History

Update and RevisionRevision Number: 0.85 Revision Date: 07-05-2023
View AllClose

Related Products